Syntetos–Boylan Classification (ADI and CV²): Smooth, Erratic, Intermittent, Lumpy
By MLAIA Data Science Ltd. · Published 10 November 2026 · Updated 10 November 2026
The Syntetos–Boylan classification sorts a demand series into one of four patterns using two numbers: the average demand interval, ADI, and the squared coefficient of variation of the non-zero demand sizes, CV². Cut at ADI = 1.32 and CV² = 0.49: below both cutoffs is smooth, high CV² alone is erratic, high ADI alone is intermittent, and both high is lumpy. For the 10-period series 0, 5, 0, 0, 8, 0, 12, 0, 0, 6 the ADI is 10 ÷ 4 = 2.5 and CV² is 0.12, so the series is intermittent, and the recommended estimator is SBA rather than exponential smoothing.
The two statistics
- ADI — average demand interval
- The mean number of periods between successive periods with non-zero demand. The simplest computation, and the one used throughout this wiki, is the number of periods in the history divided by the number of periods with demand. ADI = 1 means demand every period; ADI = 4 means demand, on average, once every four periods. (Averaging the measured gaps between demands instead gives a slightly different value on short histories, because the periods before the first demand are treated differently.)
- CV² — squared coefficient of variation of demand sizes
- Take only the periods with demand, compute the mean μ and the variance σ² of those sizes, and form CV² = σ² ÷ μ². It measures how variable order sizes are relative to their typical size, ignoring the zeros entirely. This wiki and the classifier tool use the population variance (divide by the number of non-zero periods); using the sample variance raises CV² slightly on short histories.
The four quadrants and the cutoffs
| CV² < 0.49 | CV² ≥ 0.49 | |
|---|---|---|
| ADI < 1.32 | Smooth — exponential smoothing, ETS, ARIMA | Erratic — robust smoothing; SBA also applies |
| ADI ≥ 1.32 | Intermittent — SBA (TSB if demand may be ending) | Lumpy — SBA plus an empirical lead-time-demand distribution |
Where 1.32 and 0.49 come from. Syntetos, Boylan and Croston (2005) compared the theoretical mean squared error of Croston's method with that of its bias-corrected form, SBA, as functions of the demand interval and the size variability. Croston wins only when demand is frequent and stable; the boundaries of that region, approximated by two straight cuts, are ADI = 1.32 and CV² = 0.49. The scheme was therefore designed to choose between two estimators, and it has since become the standard vocabulary for describing demand patterns in general. Kostenko and Hyndman (2006) showed that the exact boundary is a single sloping line, approximately CV² > 2 − 1.5·ADI, so that for any ADI above about 1.32 SBA is preferred regardless of CV²; the two-cutoff scheme is the practical simplification of that line.
Worked example: one series per quadrant
Four short series, all computed the same way. The arithmetic for the intermittent one is shown in full; the others follow the same steps.
Intermittent — 0, 5, 0, 0, 8, 0, 12, 0, 0, 6. Ten periods, four with demand, so ADI = 10 ÷ 4 = 2.5. The non-zero sizes are 5, 8, 12 and 6, with mean 31 ÷ 4 = 7.75. Squared deviations: 7.5625, 0.0625, 18.0625 and 3.0625, summing to 28.75; variance 28.75 ÷ 4 = 7.19.
CV² = 7.19 ÷ 7.75² = 7.19 ÷ 60.06 = 0.12 → ADI 2.5 ≥ 1.32, CV² 0.12 < 0.49: intermittent
| Series | Periods / with demand | ADI | Mean of non-zero sizes | Variance | CV² | Quadrant |
|---|---|---|---|---|---|---|
| 10, 12, 9, 11, 10, 13 | 6 / 6 | 1.00 | 10.83 | 1.81 | 0.015 | Smooth |
| 10, 2, 15, 30, 5, 12 | 6 / 6 | 1.00 | 12.33 | 80.89 | 0.53 | Erratic |
| 0, 5, 0, 0, 8, 0, 12, 0, 0, 6 | 10 / 4 | 2.50 | 7.75 | 7.19 | 0.12 | Intermittent |
| 0, 0, 20, 0, 1, 0, 0, 50, 0, 0, 4, 0 | 12 / 4 | 3.00 | 18.75 | 377.69 | 1.07 | Lumpy |
The erratic series has demand every period, like the smooth one, but its sizes range from 2 to 30, so CV² crosses 0.49. The lumpy series shares the intermittent one's sporadic timing but its sizes range from 1 to 50, pushing CV² above 1. Paste any of these into the free classifier to reproduce the numbers.
What the quadrant tells you
- Smooth. Classical methods apply: exponential smoothing, state-space models, ARIMA, with trend and seasonality modelled explicitly. The normal-based safety-stock formula is reasonable.
- Erratic. Demand is frequent but sizes swing. Smoothing still works for the level, but forecast errors are wide; size the buffer from the error distribution rather than the average, and damp the reaction to spikes.
- Intermittent. Use SBA for the rate. Because sizes are fairly stable, a discrete distribution (Poisson for unit demands, or a compound model) calibrates the reorder point reasonably well.
- Lumpy. SBA for the rate, but expect a low ceiling on accuracy. Set the reorder point from an empirical or bootstrapped lead-time-demand distribution, as in Safety Stock and Reorder Point for Intermittent Demand.
- Any quadrant with a lengthening interval. A rising ADI from one refresh to the next is the early signal of obsolescence; switch to TSB, whose forecast decays through runs of zeros, and review the item for excess stock.
Using the scheme in practice
- Bucket size changes the answer. An item that is intermittent weekly may be smooth monthly. Classify at the bucket used for replenishment decisions.
- Short histories classify unreliably. Fewer than about 24 periods, or only one or two non-zero periods (CV² of a single size is zero by construction), should be treated as provisional.
- Boundaries are soft. ADI 1.30 and 1.35 describe nearly the same item. Use the quadrant to choose a sensible default, not to justify abrupt method switches.
- Re-classify on every refresh. Movement between quadrants is itself information about the item's lifecycle, and the scheme is cheap enough to run across a whole catalog each cycle. How it fits alongside ABC and XYZ analysis is covered in Demand Classification for Forecasting.
Frequently asked questions
What do ADI and CV² stand for?
ADI is the average demand interval: the number of periods in the history divided by the number of periods that had any demand. CV² is the squared coefficient of variation of the non-zero demand sizes: their variance divided by the square of their mean. ADI measures how sporadic the timing is; CV² measures how variable the order sizes are when demand does occur.
Why are the cutoffs 1.32 and 0.49?
Syntetos, Boylan and Croston (2005) compared the expected squared error of Croston's method with that of the bias-corrected SBA estimator across demand patterns. Croston is better only when demand is both frequent and stable; the edges of that region, approximated by two straight cuts, fall at ADI = 1.32 and CV² = 0.49. Kostenko and Hyndman (2006) later showed the exact boundary is a single sloping line that the two cutoffs approximate.
How do I calculate ADI and CV² in Excel?
With the demand history in a column, ADI = COUNT(range) / COUNTIF(range, ">0"). For CV², filter or use array formulas on the non-zero values: CV² = VAR.P(non-zero values) / AVERAGE(non-zero values)^2. For the series 0, 5, 0, 0, 8, 0, 12, 0, 0, 6 this gives ADI = 10 / 4 = 2.5 and CV² = 7.19 / 7.75² = 0.12. The free demand classifier on this site does the same calculation on a pasted series.
References
- Syntetos, A. A., Boylan, J. E., & Croston, J. D. (2005). On the categorization of demand patterns. Journal of the Operational Research Society, 56(5), 495–503.
- Kostenko, A. V., & Hyndman, R. J. (2006). A note on the categorization of demand patterns. Journal of the Operational Research Society, 57(10), 1256–1257.
- Syntetos, A. A., & Boylan, J. E. (2005). The accuracy of intermittent demand estimates. International Journal of Forecasting, 21(2), 303–314.
- Croston, J. D. (1972). Forecasting and stock control for intermittent demands. Operational Research Quarterly, 23(3), 289–303.
- Boylan, J. E., & Syntetos, A. A. (2021). Intermittent Demand Forecasting: Context, Methods and Applications. Wiley.
See also
- Demand Forecasting Wiki — all articles
- Intermittent and Lumpy Demand
- Lumpy Demand: Meaning, Detection and Forecasting
- SBA and TSB: The Corrections to Croston's Method
- Demand Classification for Forecasting
- Safety Stock and Reorder Point for Intermittent Demand
Try it on your own items
- Classify your own items with the free ADI / CV² classifier — runs in your browser, no signup.
- See how NextDemand forecasts spare parts and other slow movers — item by item, with order recommendations.
- Open the live NextDemand demo →